If you recently moved into a Phoenix-area home, you may know where the thermostat is without knowing what equipment it controls. A unit on the roof, a cabinet beside the house, and a wall-mounted unit in the casita can all belong to different heating and cooling arrangements.

Identifying your system makes service conversations easier and helps you find the right equipment documentation. You don’t need to open electrical panels or climb onto the roof. Start with visible equipment, installation records, and accessible labels.

Start With Two Questions: How Is It Arranged, and How Does It Heat?

HVAC terminology describes different things. “Packaged” and “split” describe where the components are located. “Heat pump” describes how the equipment operates. “Ductless” describes how conditioned air reaches the room.

These categories overlap. A heat pump can be a rooftop packaged unit or a split system. A ductless mini-split can also be a heat pump.

Identify the equipment arrangement first, then confirm how it provides heating. A rooftop location alone does not establish whether the system uses a heat pump, gas, or electric resistance heat.

1. Rooftop Packaged Systems

Packaged heating and cooling unit on the shingle roof of a Phoenix-area home, with turbine vents and palm trees beyond

A packaged system houses the main heating and cooling components in one outdoor cabinet. In the rooftop configuration, duct connections carry air between that cabinet and the home.

Helping Hands services rooftop package units in Glendale and across the Phoenix area.

Clues you may see from a safe location include:

  • A large equipment cabinet on the roof.
  • A duct connection entering the home through the roof.
  • Service paperwork identifying the equipment as a package or packaged unit.

Don’t identify equipment by rooftop location alone. Roof vents and other equipment can also be visible. Use the model information or ask a technician to confirm what you have.

If the label cannot be read safely from an accessible location, request a photo during a service visit.

2. Split Systems With Indoor and Outdoor Equipment

Outdoor split-system condenser on a concrete pad beside a stucco home, with its electrical disconnect mounted on the wall

A split system separates the outdoor equipment from the indoor equipment. You may see an outdoor cabinet beside the house while the indoor air handler or furnace is in an attic, closet, or garage.

The outdoor cabinet is only part of the system. Indoor equipment moves air through the ductwork, and the system’s heating arrangement depends on the installed components.

A split setup may use a heat pump with an indoor air handler, or a conventional air conditioner paired with a furnace. Finding a ground-level outdoor unit does not tell you which arrangement you have.

Record the indoor and outdoor model numbers separately when they are safely accessible. One equipment label may not describe the entire installation.

3. Heat Pumps Versus Air Conditioners With Furnaces

Despite its name, a heat pump provides both heating and cooling. In summer, it moves heat out of your home. In winter, it reverses the process and moves heat indoors.

A conventional air conditioner handles cooling, while a paired furnace supplies heat. However, some installations combine a heat pump with a furnace, so the presence of a furnace does not always rule out a heat pump.

Outdoor appearance is not a reliable way to distinguish these arrangements. Look for an equipment description on the installation invoice, manufacturer documentation matched to the model number, or a technician’s written identification.

Some systems use electric resistance heat. If the paperwork only says “electric heating,” ask which type it means.

If the system is identified but isn’t heating properly, a heat pump or furnace diagnosis can help establish the cause. Identifying equipment and diagnosing a fault are separate tasks.

4. Ductless Mini-Splits

A ductless mini-split delivers conditioned air through an indoor unit serving a room or area, rather than through the home’s central ductwork. A visible wall-mounted indoor unit connected to outdoor equipment is a useful clue.

Helping Hands installs ductless mini-splits for spaces such as additions, casitas, and converted garages. A home may have central HVAC for the main living space and a ductless system elsewhere.

Check the model documentation to confirm whether the equipment provides cooling only or both heating and cooling. A separate remote control identifies how you operate the unit, but it does not establish all of its capabilities.

Use the Thermostat as a Clue, Not Final Proof

A thermostat’s “Heat” and “Cool” settings do not distinguish a heat pump from an air conditioner paired with a furnace. Both arrangements can provide those choices.

“Aux Heat” or “Emergency Heat” can suggest a heat-pump configuration, but thermostat setup still needs to match the installed equipment. The display alone is not definitive identification.

Don’t change installer settings or remove thermostat wiring to investigate. Photograph the display and record the thermostat model if available.

Make a Simple Equipment Record

Once you have identified the arrangement, keep these details together:

  • Equipment type and location.
  • Brand, model number, and serial number for each unit.
  • Installation date, if documented.
  • The thermostat and rooms associated with each system.
  • Installation paperwork and service records.

Photograph the complete label rather than copying a few characters. Use manufacturer documentation to interpret model numbers; numbering conventions vary.

For homes with multiple systems, ask the seller or technician which areas each serves. Don’t assume every thermostat represents a separate outdoor unit, because some systems use zoning.

If you’re evaluating a property, our HVAC checklist for buying a home in Phoenix explains which records to request before closing.

Keep this information available when scheduling maintenance for your heating and cooling system. If something remains unclear, a photo and a model number are more useful starting points than a guess.

Frequently Asked Questions

Is my rooftop unit an air conditioner or a heat pump?

Its location does not answer that question. A rooftop packaged system can use different heating arrangements. Check documentation matched to the model number or ask a technician to identify it. You should not need to access the roof yourself.

Can I identify my HVAC system from the thermostat?

The thermostat provides clues, but it is not conclusive. Heating and cooling settings appear on several system types. Confirm the equipment using its model information and installation records, especially if the thermostat has been replaced.

Where can I find the model number?

Look on an accessible equipment identification label or in installation and service paperwork. Indoor and outdoor units may have separate labels. If finding one requires climbing, entering a difficult attic, or removing a service panel, ask a technician to document it.

Does a heat pump replace the need for air conditioning?

A heat pump provides air conditioning as part of its operation. The same system can cool in summer and heat in winter. Whether other heating equipment is also installed depends on the home’s particular setup.

Why does my home have more than one HVAC unit?

Separate systems may serve different floors, sections of the house, or an addition or casita. Confirm what each unit serves before drawing conclusions. Multiple thermostats can also control zones within one system, so thermostat count alone is not enough.